Installation

Important: For highway vehicles, always install Ultraseal into tires that have been previously balanced! Never attempt to re-balance tires with ANY brand of sealant in them!

Installing Ultraseal is an easy process following these simple steps:

1. Assemble pump and screw onto Ultraseal jug.
2. Remove valve core, placing thumb over valve stem to minimize air loss.
3. Attach pump hose to valve stem and pump in recommended amount of Ultraseal. (Refer to Tire Charts).
4. Detach pump hose placing thumb over valve stem.
5. Replace valve core.
6. Re-air tire to recommended p.s.i.